CA45DD Compressionfittings valve Right angle Dresser Nut pulse
solenoid valve 1.5”
Description
High performance diaphragm valve with dresser nut ports. Available
with integral pilot or as remotely piloted valve. Outlet at 90° to
inlet.
Suitable for
Dust collector applications, in particular for reverse pulse jet
filter cleaning and its variations including bag filters, cartridge
filters, envelope filters, ceramic filters, and sintered metal
fibre filters.
Maintenance
Before conducting any maintenance activity on the system ensure
that components are fully isolated from pressure and power
supplies. Pressure
and power should not be reapplied until the valve has been fully
assembled. Diaphragm and pilot inspection should be conducted
annually.
| Ordering Code | Port Size | Orifice | Flow Value | Weight (kg) |
| G Threaded | mm | Kv | Cv | CA | RCA |
| CA25DD/RCA25DD | 1" | 25 | 20 | 23 | 1.25 | 1.01 |
| CA45DD/RCA45DD | 1 1/2" | 40 | 44 | 51 | 2.30 | 2.15 |
| Construction |
| Body | Aluminum (Diecast) |
| Washer | SS 304 |
| Armature | SS 430FR |
| Core and Plugnut | Stainless steel |
| Core Spring | SS 304 |
| Sealing & disc | NBR(nitrile/buna-n) |
| Screws | SS302 |
| Diaphragm | PA-6(Standard), fluororubber |
| Shading coil | Copper |
| Connector | DIN43650A |
| Voltage | DC: 24V, AC: 24V, 48V, 110V, 230V |
| Working Temperature | -20 to +85℃ Nitrile seals -29 to +232℃ fluororubber seals |
| Protection Class | IP65 |
| Coil Insulation Class | F |
| Working Pressure | 0.35-0.85Mpa |
| Recommended on time range | 50-500ms |
| Recommended time between pulses | 1 minute or Less |
Approvals
Integrally piloted valves meet the requirements of:
•C-Tick
•EMC (89/336/CE)
•ATEX II 3 G & D (94/9/CE) (when
fitted with QR or QF type solenoids)
Installation
For your safety do not pressurise system until all valves and pipes
are fully
secured. Do not attempt to remove a fitted valve while system is
under pressure.
1. Prepare supply and blowtube pipes* to suit valve specification.
Avoid installing
valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other
particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes and blowtube to valves, tighten
dresser nuts.
5. Tanks and pipes must be independently restrained from valve.
6. Make electrical connections to solenoid or connect RCA pilot
port to pilot valve
(RCA valves only).
7. Apply moderate pressure to system and check for installation
leaks.
8. Fully pressurise system.
9. Test fire and listen for proper actuation and crisp pulse noise.
Valve is not a structural component. Do not rely on valve to retain
tanks or pipe.
*Pipes must be to Schedule 40 outside diameter
| Schedule 40 Size | OD mm | OD Inches |
3/4" | 26.7 | 1.050 |
| 1" | 33.4 | 1.315 |
| 1.5" | 48.3 | 1.900 |
FAQ
1. When your company establish?
Ningbo Fly Automation Co.,Ltd Was established in 2010, we have been
working in agrochemical field for about 26 years, we have a
professional production of process, committed to providing
customers with the most satisfactory service.
2. Are you a trader or manufacturer? Do you have factory?
We are a solenoid valve manufacturer, we have the ability of mass
production . we have our own developing and designing team, which
ensure our own technological and specific products for customers.
3. Where’s your factory located? Can we visit your factory?
Our company is in Xikou town,Fenghua city,Zhejiang Province,
China,Which is near by Ningbo city,
Customers will be always welcomed to visit our company and our
factories.Please contact us your schedule,we will arrange to pick
up you and visit our factory.
4. How do you make the quality guarantee?
We have our own quality control center, we have advanced equipments
for the inspections. We can guarantee every product will be tested
after production.
5. Can you support the specific productions?
We can design and develop the products of customer's requirement,
if you have the specific products, please send us a sample, we will
develop it for you.
6. What's the transportation service?
Usually, we will be according your address, choose the fastest and
cheapest way, the DHL,TNT,Fedex or China post express all can
support.
