UNID 2S160-15 Solenoid Valve 1/2'' Normally Closed 2 Way SS304
Water Diesel
Description:
1. Two position, two way, normal close switch, magnetic solenoid
water valve.
2. It is a good choice when the horizontal tube keep upward.
3. Used to control automatically the liquid and gas in the
pipeline.
| Model | 2S025-08 | 2S040-10 | 2S160-15 | 2S200-20 | 2S250-25 | 2S350-35 | 2S400-40 | 2S500-50 |
| Working Medium | Air,Water,Oil,Gas |
| Operation | Direct Acting |
| Acting Type | Normally Closed |
| Orifice size(mm) | 2.5 | 4 | 15 | 20 | 25 | 35 | 40 | 50 |
| Value(m^3/h) | 0.23 | 4.8 | 7.6 | 12 | 24 | 29 | 48 |
| Port size(mm) | 1/4" | 3/8" | 1/2" | 3/4" | 1" | 1 1/4" | 1 1/2" | 2" |
| Operation Fluid Viscosity | 20CST Below |
| Operating Perssure(Kgt/cm^2) | Air,Water,Oil:0-0.7Mpa |
| Max.Pressure Resistance(Kgt/cm^2) | 1.0Mpa |
| Operating Temperature(℃) | -5~100℃ |
| Voltage Range | ±10% |
| Material of Body | Brass,Stainiess Steel |
| Material of Oil Seal | NBR,EPD or VITON |
General purpose 2way direct acting and semidirect lift acting
valves.
Common applications include water, oil (below 20cst), air, gas,
freon, *vacuum, weak acids & alkali.
Available in a body/seal material of brass/NBR or stainless
steel/viton.
The coil has an adapter with screw terminals for wire leads.
Simple connect wires to the adapter and plug right into the coil
for operation.
Adapters can be removed from the coil for maintenance with no need
to detach wires.
Brass/NBR valves are suitable for water, hot water, gas, air,
non-corrosive oils and freon.
Stainless Steel/Viton valves are suitable for hot water, acid,
alkali, chemical salt, oils and hydrocarbon.
Direct Acting: These valves close or open completely on their own.
This means that they can block the flow of fluid in both
directions.
SemiDirect Acting: These valves can only stop flow in one
direction.
There is an arrow located on the valve body showing the direction
of flow in which it blocks.
In order to prevent backflow when the valve is closed, a check
valve must be installed.
